KumuKutu is a One stop Shop for building and construction materials and services like Roofing, Pipes, Fittings, Sanitary Ware, Plumbing and Waterproofing and Paint, Kitchen & Bath Tubs & Bathroom Accessories, Trucks, Tiles, Water Tanks, Heaters & Pumps, Mirrors and Many More....
Oxford Station,6th Street, Industrial Area,
Kampala Uganda
Email: info@kumukutu.com
Phone:+256 779930701
Social: @kumukutu
WhatsApp OR Call +256774993913 – OR – +256753231757
Cement-based , single component , polymer and fiber-reinforced thin or thick aggregate surface repair and recension mortar .
İnterior and exterior. Restorations,repair of concrete and prefabricated concrete elements. Wall and ceiling plaster smoothing and repair. Prior to paint ,ceramic coating and insulation,is used to have a smooth and firm surface . ALFIL TAMIRFIL Repair Mortar (thin) until 5 mm is suitable for static (stationary )cracks . ALFIL TAMIRFIL Repair Mortar (thick) untill 30mm is suitable for static (stationary) cracks .
Cracking and dust does not. Easy apply. Dry quickly ,it allows use in a short time.Provide high adhesion uncoated.Water and frost resistant. Provide smooth finish on concrete surfaces. Optionally it produced thin and thick aggregate.
It must be ensured that the application surface cured. . should be cleaned from dust, oil, paint ,silicone ,curing agent and detergent such as materials which prevent adhesion.it is necessary to wet and provided to remain moist.
25 kg. ”ALFILL TAMIRFIL Repair Mortar ” joining into approximately 5-6 lt (thick nearly 4,5-5 lt) clear water, preferably mixed with the low speed mixer or trowel until homogenous. The prepared mortar is rest of 5-10 minutes for the maturation and re-mixing and used. In pot the mix should be consumed within 30 minutes.
Repair Mortar applied with the helping a trowel to torn,cracked,broken areas on the surface . “ALFILL TAMIRFIL Repair Mortar’’ Thin can be applied between 1-5 mm thick . “ALFILL TAMIRFIL Repair Mortar ‘’thick can be applied between 5-30 mm thick. After Application The surface is suggested to moistened at regular intervals within 24 hours.
Thin : 1,5 kg/m² ( For 1 mm. Thick ) / Thick : 2 kg/m2 ( For 1mm. Thick )
Avoid to apply in the temperatures under +5°C and above +35°C. Avoid application frozen ,the risk of freezing within 24 hours or direct sun and wind in open areas .Don’t addition definitely dust and water to the mortar which has expired.After application untill the mortar cured the surface should be remain moist.ıt does not applied on ready colored plasters,paints and exterior wall coverings.
25 kg. Kraft bags.
Humid conditions and in unopened package with 10-fold stacked on a pallet can be stored for 12 months.
As all chemical products, during storage and handling it should be kept food products , the skin, eyes and mouth If swallowed accidentally , consult a doctor .In contact with skin , wash with plenty of water.
| Appearance | Grey colored thin powder | Grey colored thick powder |
|
Powder Density
|
1,45 kg/lt. | 1,60 kg/lt. |
| Water Mixing Rate | 5-6 lt. water / 25 kg. powder | 4,5-5 lt. water / 25 kg. powder |
| Resting Time | 5-10 minutes | 5-10 minutes |
| Pot Life | Approximately 30 minutes | Approximately 30 minutes |
| Application Temperature | +5°C with 35°C between | +5°C with 35°C between |
| Adhesion | > 0,5 N/mm² | > 0,5 N/mm² |
| Flexural Strength | > 3 N/mm² | > 4 N/mm² |
| Compressive Strength | > 10 N/mm² | > 15 N/mm² |
| Service Temperature | -20°C / +70°C | -30°C / +80°C |
UGX22,000–UGX27,000

Reviews
There are no reviews yet.