Cement-based, single component, is powder mortar which used for bond tile and ceramic .

Indoors, horizontal and vertical surfaces , used bonding  of small and medium sized floor and wall tiles  over  3% water absorption rate . For maximum  33x33cm . size coating materials used .

Easy to apply , economic , does not sag at vertical applications.

It must be ensured that the application surface cured. should be cleaned from dust, oil, paint ,silicone ,curing agent and detergent such as anti-stick materials. it is necessary to wet and provided to remain moist. If the surface is too water-absorbent , it should be applied after taking a primer.

25 kg ”ALFILL TEKNOFIX Tile and Ceramic Tile Adhesive ‘’ joining into approximately 6-7 lt clear water, preferably mixed with the low speed mixer or trowel until homogenous. The prepared mortar is rest of 5-10 minutes for the maturation and re-mixing and used. In pot the mix should be consumed within 2 – 2,5 hours.

At firstly , pressed adhesive mortar strongly on the application surface , create contact layer and then selected the appropriate size of tile with a notched trowel the product dredged . Adhesive mortar should be provided to contact at least 80 % backside of the ceramic. To provide good adhesion , with the help of a rubber hammer applying force , you should bond.

3,5 – 4 kg/m²

Avoid to apply in the temperatures under +5°C and above +35°C. Avoid application frozen ,the risk of freezing within 24 hours or direct sun and wind in open areas .Don’t addition definitely powder and water to the mortar which has expired .

25 kg kraft bag. Humid conditions and in unopened package with 10-fold stacked on a pallet can be stored for 12 months.

As all chemical products, during storage and handling it should be kept food products , the skin, eyes and mouth  If swallowed accidentally , consult a doctor .In contact with skin , wash with plenty of water.